Prevent Stalls…
Reduce Costly Trips Downhole…
Ensure Stronger Joint Connections…
Maintain Consistent Power for Longer Periods of Time…
Gagemaker’s JSS® Thread Inspection System for Mud Motors is a collection of systems that will help you inspect your mud motor from end to end. Drilling faster without stalls is critical to any drilling operation and increasing the time downhole and decreasing the trip time while maintaining consistent power is key in this industry. Ultimately, if the tool fails, then the operator has a very expensive problem.
The demands placed on the drilling motor to achieve optimum performance require the proper fit between the rotor and the stator in the power section. Gagemaker’s Power Section Gages ensure this fit meets these specifications.
With Gagemaker’s Stator Bore Diameter Gages, Rotor Major Diameter Gages, and Rotor Minor Diameter Gages, you are armed to maintain the efficiency and torque of the power section you produce.
The mud motor assembly encompasses a host of different style threads. With ACME straight threads, rotary shouldered connections and the ACME Mod, all of the threaded components require inspection of each and every critical thread element to ensure top performance.
The Rotary Shouldered Connection and ACME Mod threads are coarse tapered threads designed to withstand the rigors of drilling.
Straight ACME threads are found throughout the bearing mandrel and safety catch assemblies and require close inspection to exacting ANSI specifications in order to meet the performance properties that drilling demands.
With this arsenal of Gagemaker inspection gages, there’s not a motor or pump out there that can’t be inspected.
With Gagemaker’s Stator Bore Diameter Gages, Rotor Major Diameter Gages, and Rotor Minor Diameter Gages, you are armed to maintain the quality of the power section you produce. With this arsenal of inspection gages, there’s not a motor or pump out there that can’t be inspected.
Stator Inspection
Inspection of the stator’s elastomer minor diameter requires a gage that is sensitive enough to capture the minor diameter without deforming surface of the material. The design of the gage takes this into consideration by minimizing gage weight and measuring force. The gage exerts just the right amount of contact force to achieve an accurate measurement without deforming the surface of the elastomer. By taking multiple measurements through the stator’s bore, the electronic gage’s software records and averages the readings and displays an average diameter that is then compared to the rotor to achieve the necessary mated fit.
Durable, accurate, easy to use, the Gagemaker Stator Bore Gages ensure your quality levels remains at the highest level possible.
Rotor Inspection
To ensure you have the best product, Gagemaker offers a variety of gages to inspect different aspects of a rotor.
Easily inspect the following:
Inspect with the Revolutionary JSS® RSC Kit and Make an Immediate Impact on Your Bottom Line
Our JSS® RSC Inspection System is a seven step process that ensures the quality of all the various rotary shouldered connections in your mud motor.
- Extend Drill String Longevity
- Optimize Connection Performance
- Avoid Fishing for Broken Parts
- Eliminate Standoff, Lead, and Taper Errors
- Prevent Stress Cracking and Galling from Improper Make-Up and Excessive Torque
- Reduce Non-Productive Rig Time Due to String Failure
- Ensure Exact Thread Cone Interference When Torque Shoulders Make-Up
- Detect Pitch Diameter Errors that Cause Oversized Boxes and Undersized Pins
Visit our JSS® RSC Inspection System page to learn more.
Inspect with the Revolutionary JSS® ACME Modified Kit and Make an Immediate Impact on Your Bottom Line
Gagemaker’s JSS® ACME Modified Inspection System is a seven step process that ensures the quality of all ACME Modified Housing on a mud motor. The inspection system is a variation on our JSS® Rotary Shouldered Connection Inspection System. An MRP® crest diameter gage is substituted for our internal RSC pitch diameter gage. Please contact our customer service for more information on how we can help you better inspect your ACME Modified Housing today!
- Extend Drill String Longevity
- Optimize Connection Performance
- Avoid Fishing for Broken Parts
- Prevent Stress Cracking and Galling from Improper Make-Up and Excessive Torque
- Reduce Non-Productive Rig Time Due to String Failure
- Ensure Exact Thread Cone Interference When Torque Shoulders Make-Up
- Detect Pitch Diameter Errors that Cause Oversized Boxes and Undersized Pins
Visit our JSS® RSC Inspection System or MRP® crest diameter gage pages to learn more.
Assure Maximum Performance with Gagemaker’s JSS Straight Thread Inspection System
Our JSS® Straight Thread Inspection System is a seven step process that will ensure the quality and integrity of your parts and brand.
- Easy to Use
- Measure a Variety of Thread Forms & Sizes
- Quickly Verify Go & No Go Diameters
- Verify Exact Mating and Interchangeability of Threads
- No Expensive Thread Setting Masters Required
- No Waiting for Specially Sized Gages to be Ground
Visit our JSS® Straight Thread Inspection System page now to learn more!