Would you like to receive the Gage Report in your email? Sign up below.
For Tubing and Casing, properly setting a TH-3002R thread height gage is easy, yet often done incorrectly. The setting standard (1014) has a square-shaped notch and a v-shaped notch. First, use the square-shaped notch, zero the gage. Then, rotate the standard and use the v-shaped notch to verify the gage is correctly zeroed. If the […]
Come See the MIC 360 in Action! The MIC 360™ In-Process Diameter Measurement Gage is an in-process gaging system that measures any large diameter from 8″ to virtually any diameter you can manufacture! It doesn’t require a standard… one person can easily operate…measurements are captured electronically…it repeats with extremely high accuracy…and this is all done with […]
Thread height is the distance between the crest and the root of the thread, normal to the axis of the thread. Several issues are easily detected by simply inspecting thread height. Proper thread height maximizes the performance of any threaded connection. Thread height inspection is required by API. Thread height affects the interchangeability and the […]