Newsletter

April 2018 Gage Report

It’s here! OTC 2018! Starts Monday, April 30! It can’t be a year already, can it? The Offshore Technology Conference in Houston, TX is here. Come celebrate 50 years of OTC with us! Make sure to stop by our Booth #8453 to learn all about the new API 5B Thread Specifications and how we can […]

Gage Tip of the Month

March 2018

When inspecting 2⅜” and 2⅞” tubing with an MRP-1000 or MRP-2000, save time by quickly checking the PD at only one location. Because ovality typically isn’t a concern for small diameter tubing, an average of high and low readings is not necessary.

Newsletter

March 2018 Gage Report

MRP SPEC 5B APP RELEASED! Ovality & Standoff Calculator The release of API’s Sixteenth Edition of the 5B Specification created questions for many of you. Well, Gagemaker has a new FREE tool to help you. Crest diameter and thread ovality are new inspection requirements. Gagemaker’s MRP® and MRP AIR® Gages inspect crest diameter and ovality […]

Gage Tip of the Month

January 2018

Often on the shop floor you would like to verify the settings of the gage you are using.There are several simple methods to ensure your settings stay correct. Today’s tip covers the MRP® crest diameter and ovality gage and coupling inspection. When using an MRP® crest diameter gage to inspect crest diameter on a coupling, […]

Gage Tip of the Month

June 2016

An easy adjustment of your rails during assembly of an MRP-2001 will help you see the indicator better when inspecting external crest diameter, pitch diameter, or ovality. During setup, you simply position the rails so that any excess rail over-hang exists on the “fixed end”(the end not holding the indicator). Below you’ll find video instructions […]