Gage Tip of the Month

October 2016

It is good practice to quickly verify repeatability on a MIC TRAC™ 3000 at frequent intervals between calibration periods. This simple verification process involves zeroing the MIC TRAC using TF-1F fixtures (anvils). This procedure will ensure the unit repeats to a resolution of 0.0001″ or better. Simply use the Coarse Adjust Knob to open and […]

Gage Tip of the Month

July 2016

Achieve fast repeatability and reproduceability between operators by utilizing t wo TF-1F and two TF-SV MIC TRAC™ fixtures for setting ball mics and certain indicator style gages. Set the MIC TRAC to the desired setting distance and adjust the gage accordingly. Properly install a TF-SV on each TF-1F. Then, set the gage’s contact points into […]